Node: This field specifies the name of the node in the cluster.
Adapter Name: This field specifies the name of the interconnect adapter.
Adapter Type: This field specifies the type of the interconnect adapter.
Link Status: This field specifies the physical link status of the interconnect adapter.
Is OOD Enabled: This field specifies the out-of-order delivery status of the interconnect adapter.
IP Address: This field specifies the IP address assigned to the interconnect adapter.
Port Number: This field specifies the port number of the interconnect adapter.

Parameters

{ [-fields <fieldname>,…]: If you specify the -fields <fieldname>, … parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify.
| [-connectivity ]: Displays the connectivity information from all the interconnect adapters to the connected nodes.
| [-switch ]: Displays details of switches connected to all the interconnect adapters.
| [-connectivity-hidden ] (privilege: advanced): Displays additional connectivity information (IP address, Area ID, Port ID) from all the interconnect adapters to the connected nodes.
| [-instance ] }: If you specify the -instance parameter, the command displays detailed information about all fields.
[-node {<nodename>|local}] - Node Name: Displays information only about the interconnect adapters that are hosted by the specified node.
[-adapter <text>] - Adapter: Displays information only about the interconnect adapters that match the specified name.
[-port-name <text>] - Port Name: Displays information only about the interconnect adapters that host the specified port name.
[-type <text>] - Adapter Type: Displays information only about the interconnect adapters that match the specified adapter type.
[-physical-status <text>] - Physical Status: Displays information only about the interconnect adapters that match the specified physical status.
[-wwn <text>] - Adapter Port World Wide Name: Displays information only about the interconnect adapters that match the specified world wide name.
[-address <text>] - IP Address: Displays information only about the interconnect adapters that match the specified IP address.
[-firmware-version <text>] - Firmware Version: Displays information only about the interconnect adapters that match the specified firmware version.
[-link-speed <text>] - Link Speed: Displays information only about the interconnect adapters that match the specified link speed.
[-link-speed-neg-type <text>] - Link Speed Negotiation Type: Displays information only about the interconnect adapters that match the specified negotiated link speed type.
[-switch-name <text>] - Switch Name: Displays information only about the interconnect adapters that are connected to the specified switch.
[-switch-model <text>] - Switch Model: Displays information only about the interconnect adapters that are connected to the switch with the specified model.
[-switch-wwn <text>] - Switch WWName: Displays information only about the interconnect adapters that are connected to the switch with the specified world wide name.
[-switch-vendor <text>] - Switch Vendor: Displays information only about the interconnect adapters that are connected to the switch with the specified vendor.
[-switch-status <text>] - Switch Status: Displays information only about the interconnect adapters that are connected to the switch with the specified operational status.
[-switch-port-number <text>] - Switch Port Number: Displays information only about the interconnect adapters that are connected to the switch with the specified port number.
[-switch-port-wwpn <text>] - Switch Port WWPN: Displays information only about the interconnect adapters that are connected to the switch with the specified word wide port name.
[-remote-adapter-name-list <text>,…] - Remote Adapter Name List: Displays information only about the interconnect adapters that are connected to the specified remote adapters.
[-remote-adapter-wwn-list <text>,…] - Remote Adapter WWName List: Displays information only about the interconnect adapters that are connected to the remote adapters with the specified world wide names.
[-remote-adapter-address-list <text>,…] - Remote Adapter IP Address List: Displays information only about the interconnect adapters that are connected to the remote adapters with the specified IP addresses.
[-remote-adapter-port-id-list <Hex Integer>,…] - Remote Adapter Port ID List: Displays information only about the interconnect adapters that are connected to the remote adapters with the specified port IDs.
[-remote-adapter-domain-id-list <integer>,…] - Remote Adapter Domain ID List: Displays information only about the interconnect adapters that are connected to the remote adapters with the specified domain IDs.
[-remote-adapter-area-id-list <integer>,…] - Remote Adapter Area ID List: Displays information only about the interconnect adapters that are connected to the remote adapters with the specified Area IDs.
[-remote-partner-system-id-list <integer>,…] - Remote Partner System ID List: Displays information only about the interconnect adapters that are connected to the remote nodes with the specified System IDs.
[-remote-partner-name-list {<nodename>|local}] - Remote Partner Name List: Displays information only about the interconnect adapters that are connected to the specified remote nodes.
[-is-ood-enabled {true|false}] - Is Out-of-Order Delivery Enabled?: Displays information only about the interconnect adapters that match the specified out-of-order delivery setting.

Examples

The following example shows the output of the command during normal operation (neither cluster is in switchover state):

clusA::> metrocluster interconnect adapter show
                                          Link   Is OOD
       Node         Adapter         Type  Status Enabled? IP Address  Port Number
       ------------ --------------- ----- ------ -------- ----------- -----------
       clusA-01     cxgb3_0         iWARP Up     false    10.0.1.1    c0a
       clusA-01     cxgb3_0         iWARP Down   false    10.0.2.1    c0b
       clusA-01     fcvi_device_0   FC-VI Up     false    1.0.0.1     1a
       clusA-01     fcvi_device_1   FC-VI Up     false    2.0.0.3     1b
       clusA-02     cxgb3_0         iWARP Up     false    10.0.1.2    c0a
       clusA-02     cxgb3_0         iWARP Down   false    10.0.2.2    c0b
       clusA-02     fcvi_device_0   FC-VI Up     false    1.0.1.1     1a
       clusA-02     fcvi_device_1   FC-VI Up     false    2.0.1.3     1b

The following example shows the output of the command after MetroCluster switchover is performed:

clusA::> metrocluster interconnect adapter show
                                          Link   Is OOD
       Node         Adapter         Type  Status Enabled? IP Address  Port Number
       ------------ --------------- ----- ------ -------- ----------- -----------
       clusA-01     cxgb3_0         iWARP Up     false    10.0.1.1    c0a
       clusA-01     cxgb3_0         iWARP Down   false    10.0.2.1    c0b
       clusA-01     fcvi_device_0   FC-VI Down   false    1.0.0.1     1a
       clusA-01     fcvi_device_1   FC-VI Down   false    2.0.0.3     1b
       clusA-02     cxgb3_0         iWARP Up     false    10.0.1.2    c0a
       clusA-02     cxgb3_0         iWARP Down   false    10.0.2.2    c0b
       clusA-02     fcvi_device_0   FC-VI Down   false    1.0.1.1     1a
       clusA-02     fcvi_device_1   FC-VI Down   false    2.0.1.3     1b

The following example shows the output of the command with connectivity field during normal operation (neither cluster is in swithover state):

clusA::> metrocluster interconnect adapter show -connectivity -node local -type FC-VI
Adapter Name: fcvi_device_0
                     WWName: 21:00:00:24:ff:32:01:68
                     PortNo: 1a
Remote Adapters:
Adapter Name Partner Node Name World Wide Name         PortId
       ------------ ----------------- ----------------------- ------
       fcvi_device_0
                    clusA-01          21:00:00:24:ff:32:01:80  65536
       fcvi_device_0
                    clusB-01          21:00:00:24:ff:32:01:54 131072
       fcvi_device_0
                    clusB-02          21:00:00:24:ff:32:01:60 131328
Adapter Name: fcvi_device_1
                     WWName: 21:00:00:24:ff:32:01:69
                     PortNo: 1b
Remote Adapters:
Adapter Name Partner Node Name World Wide Name         PortId
       ------------ ----------------- ----------------------- ------
       fcvi_device_1
                    clusA-01          21:00:00:24:ff:32:01:81 196608
       fcvi_device_1
                    clusB-01          21:00:00:24:ff:32:01:55 262144
       fcvi_device_1
                    clusB-02          21:00:00:24:ff:32:01:61 262400

The following example shows the output of the command with connectivity field after MetroCluster swithover is performed.

clusA::> metrocluster interconnect adapter show -connectivity -node local -type FC-VI
Adapter Name: fcvi_device_0
                     WWName: 21:00:00:24:ff:32:01:68
                     PortNo: 1a
Remote Adapters:
Adapter Name Partner Node Name World Wide Name         PortId
       ------------ ----------------- ----------------------- ------
       fcvi_device_0
                    clusA-01          21:00:00:24:ff:32:01:80  65536
Adapter Name: fcvi_device_1
                     WWName: 21:00:00:24:ff:32:01:69
                     PortNo: 1b
Remote Adapters:
Adapter Name Partner Node Name World Wide Name         PortId
       ------------ ----------------- ----------------------- ------
       fcvi_device_1
                    clusA-01          21:00:00:24:ff:32:01:81 196608