ONTAP 9.15.1 commands

vserver nfs tls interface show

Display the TLS configurations of NFS servers

Availability: This command is available to cluster and Vserver administrators at the admin privilege level.

Description

The vserver nfs tls interface show command displays information about TLS configurations for NFS. The command output depends on the parameters specified with the command. If you do not specify any parameters, the command displays the following information about all TLS configurations for NFS:

  • Vserver name

  • Logical interface name

  • Logical interface IP address

  • Whether TLS is enabled or disabled

  • The TLS certificate name

  • The TLS certificate UUID

You can specify additional parameters to display only information that matches those parameters. For instance, to display information only about TLS configurations for NFS that are enabled, run the command with the -status enabled parameter.

Parameters

{ [-fields <fieldname>,…​]

If you specify the -fields <fieldname>, …​ parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify.

| [-instance ] }

If you specify the -instance parameter, the command displays detailed information about all fields.

[-vserver <vserver name>] - Vserver

If you specify this parameter and the -lif parameter, the command displays information only about the TLS configuration or configurations for NFS that are associated with the specified Vserver and logical interface.

[-lif <text>] - Logical Interface

If you specify this parameter and the -vserver parameter, the command displays information only about the TLS configuration or configurations for NFS that are associated with the specified logical interface and Vserver.

[-address <IP Address>] - IP Address

If you specify this parameter, the command displays information only about the TLS configurations for NFS that are associated with the specified logical-interface IP address.

[-status {enabled|disabled}] - TLS Status

If you specify this parameter, the command displays information only about the TLS configurations for NFS that match the specified value.

[-certificate-name <text>] - TLS Certificate Name

If you specify this parameter, the command displays information only about the TLS configurations for NFS that match the specified value.

[-certificate-uuid <UUID>] - TLS Certificate UUID

If you specify this parameter, the command displays information only about the TLS configuration for NFS that match the specified value.

Examples

The following example displays information about the TLS configuration for NFS associated with the Vserver vs0 and the logical interface datalif1:

vs1::> vserver nfs tls interface show -vserver vs0 -lif datalif1
             Vserver: vs0
   Logical Interface: datalif1
          IP Address: 192.0.2.130
          TLS Status: enabled
TLS Certificate Name: vs0_17A014E1FA994582
TLS Certificate UUID: d1905777-98e8-11ee-aa96-005056bb844f
Top of Page