ONTAP 9.12.1 commands

50←PDF
  • ONTAP 9.12.1 commands(CA08871-263en.pdf)
  • network interface service-policy rename

    Rename an existing network service policy

    Availability: This command is available to cluster administrators at the advanced privilege level.

    Description

    The network interface service-policy rename command assigns a new name to an existing service policy without disrupting the LIFs using the policy.

    Parameters

    -vserver <vserver name> - Vserver

    Use this parameter to specify the name of the Vserver of the service policy to be renamed.

    -policy <text> - Policy Name

    Use this parameter to specify the name of the service policy to be renamed.

    -new-name <text> - New Service Policy Name

    Use this parameter to specify the new name for the service policy.

    Examples

    The following example shows the renaming of a service policy.

    cluster1::> network interface service-policy show -vserver cluster1
    Vserver   Policy                     Service: Allowed Addresses
    --------- -------------------------- ----------------------------------------
    cluster1
              custom                     intercluster-core: 0.0.0.0/0
                                         management-autosupport: 0.0.0.0/0
                                         management-ssh: 0.0.0.0/0
                                         management-https: 0.0.0.0/0
    default-intercluster       intercluster-core: 0.0.0.0/0
                                         management-https: 0.0.0.0/0
    default-management         management-core: 0.0.0.0/0
                                         management-autosupport: 0.0.0.0/0
                                         management-ssh: 0.0.0.0/0
                                         management-https: 0.0.0.0/0
    default-route-announce     management-bgp: 0.0.0.0/0
    
    4 entries were displayed.
    
    cluster1::> network interface service-policy rename -vserver cluster1 -policy custom -new-name system
    
    cluster1::> network interface service-policy show -vserver cluster1
    Vserver   Policy                     Service: Allowed Addresses
    --------- -------------------------- ----------------------------------------
    cluster1
              system                     intercluster-core: 0.0.0.0/0
                                         management-autosupport: 0.0.0.0/0
                                         management-ssh: 0.0.0.0/0
                                         management-https: 0.0.0.0/0
    default-intercluster       intercluster-core: 0.0.0.0/0
                                         management-https: 0.0.0.0/0
    default-management         management-core: 0.0.0.0/0
                                         management-autosupport: 0.0.0.0/0
                                         management-ssh: 0.0.0.0/0
                                         management-https: 0.0.0.0/0
    default-route-announce     management-bgp: 0.0.0.0/0
    
    4 entries were displayed.
    Top of Page