ONTAP 9.12.1 commands

50←PDF
  • ONTAP 9.12.1 commands(CA08871-263en.pdf)
  • network subnet remove-ranges

    Remove address ranges from a subnet

    Availability: This command is available to cluster administrators at the admin privilege level.

    Description

    Remove address ranges from a subnet.

    Parameters

    -ipspace <IPspace> - IPspace Name

    The IPspace in which the range resides.

    -subnet-name <subnet name> - Subnet Name

    The name of the subnet.

    -ip-ranges {<ipaddr>|<ipaddr>-<ipaddr>} - IP Ranges

    IP ranges to remove.

    [-force-update-lif-associations <true>] - Force Update LIF Associations

    This command will fail if any existing service processor interfaces or network interfaces are using IP addresses in the ranges provided. Using this parameter will remove the subnet’s association with those interfaces and allow the command to succeed.

    Examples

    The following example removes an address range with starting address of 10.98.1.1 from subnet s1 in IPspace Default .

    cluster1::> network subnet remove-ranges -ipspace Default -subnet-name s1
        -ip-ranges "10.98.1.1-10.98.1.30"
    Top of Page