Modifications take effect immediately after you execute the command. Making modifications to your service can result in traffic loss on a live system. Call Fujitsu support personnel if you are unsure of the possible consequences.

Parameters

-vserver <Vserver Name> - Vserver

Specifies the Vserver for the iSCSI service.

[-target-name <text>] - Target Name

Specifies an iSCSI target name of a Vserver. This name is unique and is not case sensitive. The target name must conform to this format iqn.1995-08.com.example:string and the following rules:

Contains up to 128 bytes.
Contains alphanumeric characters. The period ".", hyphen "-", and colon ":" are acceptable.
Does not contain the underscore character "_".

The iSCSI service must be down in order to change the target name.

{ [-target-alias <text>] - Target Alias

Specifies the new target alias of the iSCSI service.

| [-c, -clear <true>] - Clear the Target Alias }

Clears the current target alias from the iSCSI service configuration.

[-status-admin {down|up}] - Administrative Status

Specifies the configured administrative status of a service. If you set this parameter to up, the iSCSI service begins to accept login requests from iSCSI initiators. If you set this parameter to down, iSCSI initiators cannot log in.

[-retain-timeout <integer>] - RFC3720 DefaultTime2Retain Value (in sec)

Specifies the wait time before active task reassignment is possible after an unexpected connection termination. For example, a value of 0 means that the connection or task state is immediately discarded by the target.

[-login-timeout <integer>] - Login Phase Duration (in sec)

Specifies maximum time the login phase remains active until the iSCSI target terminates the connection.

[-max-conn-per-session <integer>] - Max Connections per Session

Specifies the maximum number of connections per session that the iSCSI target can accept.

[-max-ios-per-session <integer>] - Max Commands per Session

Specifies the maximum number of commands per session that the iSCSI target can accept.

[-tcp-window-size <integer>] - TCP Receive Window Size (in bytes)

Specifies the TCP receive window size (in bytes).

A change to the TCP receive window size value takes effect for all network interfaces when you restart the iSCSI service for the Vserver as follows:

vserver iscsi stop -vserver <vserver name>
vserver iscsi start -vserver <vserver name>

If you change an individual network interface from up to down back to up, as follows, the new value for TCP receive window size takes effect for that network interface:

network interface modify -vserver <vserver name> -lif <LIF name> -status-admin down
network interface modify -vserver <vserver name> -lif <LIF name> -status-admin up

[-f, -force <true>] - Allow Non-Vendor Target Name: Force the command to accept a target name that would normally be rejected as invalid.

Examples

cluster1::> vserver iscsi modify -vserver vs_1 -status-admin down

Modifies the status-admin of the iSCSI service for Vserver vs_1 to down.