ONTAP 9.12.1 commands

50←PDF
  • ONTAP 9.12.1 commands(CA08871-263en.pdf)
  • vserver nvme subsystem host add

    Add a host to a subsystem

    Availability: This command is available to cluster and Vserver administrators at the admin privilege level.

    Description

    The vserver nvme subsystem host add command adds an FC-NVMe host to an NVMe subsystem on a Vserver.

    Parameters

    -vserver <Vserver Name> - Vserver Name

    Specifies the Vserver.

    -subsystem <text> - Subsystem

    Specifies the NVMe target subsystem.

    -host-nqn <text> - Host NQN

    Specifies the NVMe subsystem host NQN.

    [-dhchap-host-secret-key <text>] - Authentication Host Secret

    Specifies the NVMe DH-HMAC-CHAP in-band authentication host secret.

    [-dhchap-controller-secret-key <text>] - Authentication Controller Secret

    Specifies the NVMe DH-HMAC-CHAP in-band authentication controller secret.

    [-dhchap-hash-function {sha-256|sha-512}] - Authentication Hash Function

    Specifies the NVMe DH-HMAC-CHAP in-band authentication hash function.

    [-dhchap-dh-group {none|2048-bit|3072-bit|4096-bit|6144-bit|8192-bit}] - Authentication Diffie-Hellman Group

    Specifies the NVMe DH-HMAC-CHAP in-band authentication Diffie-Hellman group size.

    Examples

    cluster::*> vserver nvme subsystem host add -vserver vs_1 -subsystem sub_1 -host-nqn nqn.2001-01.com.example:nvme-host1

    Adds a host with the specified NQN to the NVMe subsystem sub_1 on Vserver vs_1 .

    Top of Page