ONTAP 9.12.1 commands

50←PDF
  • ONTAP 9.12.1 commands(CA08871-263en.pdf)
  • storage shelf acp configure

    Configure alternate control path (ACP)

    Availability: This command is available to cluster administrators at the admin privilege level.

    Description

    Configure the ACP connectivity on the cluster.

    Parameters

    -is-enabled {true|false} - Is Enabled?

    Configures the connectivity to the specified state.

    [-subnet <IP Address>] - Subnet

    Configures the connectivity to the specified subnet.

    [-netmask <IP Address>] - Netmask

    Configures the connectivity to the specified netmask.

    [-channel {out-of-band|in-band}] - Channel

    Configures the connectivity to the specified channel.

    Examples

    The following example configures out-of-band ACP connectivity on each node:

    cluster1::> storage shelf acp configure -is-enabled true -channel out-of-band -subnet 192.168.0.1 -netmask 255.255.255.0

    The following example configures in-band ACP connectivity on each node:

    cluster1::> storage shelf acp configure -is-enabled true -channel in-band

    The following example disables ACP connectivity on each node:

    cluster1::> storage shelf acp configure -is-enabled false
    Top of Page