ONTAP 9.12.1 commands

50←PDF
  • ONTAP 9.12.1 commands(CA08871-263en.pdf)
  • security snmpusers

    Show SNMP users

    Availability: This command is available to cluster administrators at the admin privilege level.

    Description

    The security snmpusers displays the following information about SNMP users:

    • User name

    • Authentication method

    • Hexadecimal engine ID

    • Authentication protocol

    • Privacy protocol

    • Security group

    Parameters

    { [-fields <fieldname>,…​]

    If you specify the -fields <fieldname>, …​ parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify.

    | [-instance ] }

    If you specify the -instance parameter, the command displays detailed information about all fields.

    [-vserver <Vserver Name>] - Vserver

    If this parameter is specified, the command displays information only about the SNMP user or users that belong to the specified Vserver.

    [-username <text>] - User Name

    If this parameter is specified, the command displays information only about the SNMP user with the specified user name.

    [-authmethod <text>] - Authentication Method

    If this parameter is specified, the command displays information only about the SNMP user or users that use the specified authentication method. Possible values include the following:

    • community-SNMP community strings

    • usm-SNMP user security model

    [-remote-switch-ipaddress <IP Address>] - Remote Switch IP Address

    If this parameter is specified, the command displays information only about the remote SNMP user or users that belong to the specified remote switch.

    [-engineid <Hex String>] - Engine Id

    If this parameter is specified, the command displays information only about the SNMP user or users that use the specified engine ID, specified in hexadecimal format.

    [-authprotocol <text>] - Authentication Protocol

    If this parameter is specified, the command displays information only about the SNMP user or users that use the specified authentication protocol.

    [-privprotocol <text>] - Privacy Protocol

    If this parameter is specified, the command displays information only about the SNMP user or users that use the specified privacy protocol.

    [-securitygroup <text>] - Security Group

    If this parameter is specified, the command displays information only about the SNMP user or users that belong to the specified security group.

    Examples

    The following example displays information about all SNMP users:

    cluster1::> security snmpusers
                                                    Protocols Security  Remote
    Vserver  UserName   AuthMethod EngineId         Auth Priv Group     Switch IP
    -------- ---------- ---------- ---------------- ---- ---- --------- -----------
    cluster1 comm1      community  8000031504312d38302d313233343536     -
                                                    -    -    readwrite
    cluster1 private    community  8000031504312d38302d313233343536      -
                                                    -    -    readwrite
    cluster1 snmpuser1  usm        80000634b21000000533296869
                                                    -    -    readwrite 172.2.20.91
    vs1      snmpuser2  community  8000031504312d38302d31323334353632
                                                    -    -    readwrite -
    vs1      snmpuser3  usm        8000031504312d38302d31323334353632
                                                    -    -    readwrite -
    Top of Page