ONTAP 9.12.1 commands

50←PDF
  • ONTAP 9.12.1 commands(CA08871-263en.pdf)
  • storage array port modify

    Make changes to a target port record.

    Availability: This command is available to cluster administrators at the admin privilege level.

    Description

    The storage array port modify command lets the user change array target port parameters.

    Parameters

    -name <text> - Name

    Selects the array ports that match this parameter value. The storage array name is either generated by Data ONTAP or assigned by the user.

    -wwnn <text> - WWNN

    Selects the array ports that match this parameter value.

    -wwpn <text> - WWPN

    Selects the array ports that match this parameter value.

    [-max-queue-depth <integer>] - Target Port Queue Depth

    The target port queue depth for this target port.

    [-utilization-policy {normal|defer}] - Utilization Policy

    The policy used in automatically adjusting the queue depth of the target port based on its utilization.

    Examples

    This command changes the maximum queue depth for this target port to 32.

    cluster1::> storage array port modify -name HITACHI_DF600F_1 -wwnn 50060e80004291c0 -wwpn 50060e80004291c0 -max-queue-depth 32
    Top of Page