SANtricity 11.8 Commands ( CA08871-194 ~ 196 )

Clear volume reservations

The clear volume reservations command clears persistent volume reservations.

Supported Series

This command applies to any individual storage system, including the HB2100/HB2200/HB2300, HB5100/HB5200, AB6100 and AB3100 series, as long as all SMcli packages are installed.

Roles

To execute this command on an HB2100/HB2200/HB2300, HB5100/HB5200, AB6100, or AB3100 storage system, you must have the Storage Admin role.

Syntax

clear (allVolumes | volume [volumeName] |
volumes ["volumeName1" ... "volumeNameN"]) reservations

Parameters

Parameter Description

allVolumes

The setting to clear persistent volume reservations on all of the volumes in the storage system.

volume

The name of a volume for which you are clearing persistent reservations. Enclose the volume name in square brackets ([ ]). If the volume name contains special characters or consists only of numbers, you must enclose the name in double quotation marks (" ") inside square brackets.

volumes

The names of several volumes for which you are clearing persistent reservations. Enter the names of the member volumes using these rules:

  • Enclose all of the names in square brackets ([ ]).

  • Enclose each of the names in double quotation marks (" ").

  • Separate each of the names with a space.

Notes

You can use any combination of alphanumeric characters, hyphens, and underscores for the names. Names can have a maximum of 30 characters.

Top of Page