SANtricity 11.9 Commands ( CA08871-194 ~ 196 )

Stop drive channel locate

The stop driveChannel locate command turns off the indicator lights on the drive trays that were turned on by the start driveChannel locate command.

Supported Series

This command applies to any individual storage system, including the ETERNUS AB3100, ETERNUS AB6100, ETERNUS HB1100/HB1200/HB1300/HB1400, ETERNUS HB2100/HB2200/HB2300/HB2400/HB2500/HB2600, and ETERNUS HB5100/HB5200, as long as all SMcli packages are installed.

Roles

To execute this command on an ETERNUS AB3100, ETERNUS AB6100, ETERNUS HB1100/HB1200/HB1300/HB1400, ETERNUS HB2100/HB2200/HB2300/HB2400/HB2500/HB2600, or ETERNUS HB5100/HB5200 storage system, you must have the Storage Admin role.

Syntax

stop driveChannel locate

Parameters

None.

Top of Page