0

SUCCESSFUL

The command terminated without an error.

1

INVALID_USAGE

The command terminated with an error. Information about the error also appears.

2

SCRIPT_FILE_DOES_NOT_EXIST

The script file does not exist.

3

ERROR_OPENING_OUTPUT_FILE

An error occurred while opening an output file.

4

NO_STORAGE_ARRAY_AT_ADDRESS

A storage system was not at the specified address.

5

ADDRESSES_SPECIFY_DIFFERENT_ARRAYS

Addresses specify different storage systems.

6

NO_SANAME_FOR_HOST_AGENT_CONNECT

A storage system name does not exist for the host agent that is connected.

7

SANAME_NOT_AT_ADDRESS

The storage system name was not at the specified address.

8

SANAME_NOT_UNIQUE

The storage system name was not unique.

9

SANAME_NOT_IN_CONFIG_FILES

The storage system name was not in the configuration file.

10

NO_MANAGEMENT_CLASS_FOR_SA

A management class does not exist for the storage system.

11

NO_SA_IN_CONFIG_FILE_FOUND

A storage system was not found in the configuration file.

12

INTERNAL_ERROR

An internal error occurred. This exit status indicates that you do not have privileges for running a CLI command from the command line. You must have administrator privileges to run all of the CLI commands from a command line.

13

INVALID_SCRIPT_SYNTAX

Invalid script syntax was found.

14

UNABLE_TO_COMMUNICATE

The controller was unable to communicate with the storage system.

15

DUPLICATE_ARGUMENT

A duplicate argument was entered.

16

EXECUTION_ERROR

An execution error occurred.

17

NO_HOST_AT_ADDRESS

A host was not at the specified address.

18

WWNAME_NOT_IN_CONFIG_FILES

The WWID was not in the configuration file.

19

WWNAME_NOT_AT_ADDRESS

The WWID was not at the address.

20

UNKNOWN_IP

An unknown IP address was specified.

21

PM_CONFIG_FILE_CORRUPTED

The Event Monitor configuration file was corrupted.

22

UNABLE_TO_COMMUNICATE_TO_PM

The storage system was unable to communicate with the Event Monitor.

23

UNEXIST_ALERT

The controller was unable to write alert settings.

24

WRONG_ORGANIZER_NODE

The wrong organizer node was specified.

25

CMD_NOT_AVAILABLE

The command was not available.

26

DEVICE_NOT_IN_CONFIG_FILE

The device was not in the configuration file.

27

ERROR_UPDATING_CONFIG_FILE

An error occurred while updating the configuration file.

28

UNKNOWN_HOST_ERROR

An unknown host error occurred.

29

SENDER_CONTACT_FILE_NOT_FOUND

The sender contact information file was not found.

30

READ_SENDER_CONTACT_FILE_FAILED

The sender contact information file could not be read.

31

USERDATA_FILE_EXISTS

The userdata.txt file exists.

32

BAD_EMAIL_INFORMATION_TO_INCLUDE

An invalid -I value in the email alert notification was specified.

33

BAD_EMAIL_FREQUENCY

An invalid -f value in the email alert notification was specified.

34

OPTION_REMOVED

The -r option is not supported anymore.

35

UNKNOWN_ALERT_PRIORITY

Invalid alert severity specified.

36

PASSWORD_REQUIRED

The operation needs either the Administrator or Monitor password to be set.

37

INVALID_MONITOR_PASSWORD

The operation cannot be completed because an invalid Monitor password was entered.

38

INVALID_ADMIN_PASSWORD

The operation cannot be completed because an invalid Administrator password was entered.

39

EXCEEDED_MAX_CHARS_FOR_PASSWORD

The password provided is exceeding the character limit.

40

INVALID_MONITOR_TOKEN

The -R monitor is not supported for this array. Use a valid role and retry the operation.

41

ASUP_CONFIG_ERROR

An error occurred while writing to or reading from the AutoSupport configuration file. Please retry this operation again.

42

MAIL_SERVER_UNKNOWN

Host address or mail server address is incorrect.

43

ASUP_SMTP_REPLY_ADDRESS_REQUIRED

No healthy ASUP enabled arrays detected while attempting ASUP configuration test.

44

NO_ASUP_ARRAYS_DETECTED

Reply email request required if ASUP delivery type is SMTP.

45

ASUP_INVALID_MAIL_RELAY_SERVER

Unable to validate ASUP mail relay server.

46

ASUP_INVALID_SENDER_EMAIL

Sender email address you specified is not a valid format.

47

ASUP_INVALID_PAC_SCRIPT

Proxy Auto-Configuration (PAC) script file is a not a valid URL.

48

ASUP_INVALID_PROXY_SERVER_HOST_ADDRESS

The Host address specified cannot be found or is in an incorrect format.

49

ASUP_INVALID_PROXY_SERVER_PORT_NUMBER

The port number you specified is an invalid format.

50

ASUP_INVALID_AUTHENTICATION_PARAMETER

The username or password you specified is invalid.

51

ASUP_INVALID_DAILY_TIME_PARAMETER

The daily time parameter specified is invalid.

52

ASUP_INVALID_DAY_OF_WEEK_PARAMETER

The -dayOfWeek parameter(s) that have been entered are invalid.

53

ASUP_INVALID_WEEKLY_TIME_PARAMETER

The weekly time parameter is not valid.

54

ASUP_INVALID_SCHEDULE_PARSING

Unable to successfully parse the schedule information provided.

55

ASUP_INVALID_SA_SPECIFIED

Invalid storage system specifier provided.

56

ASUP_INVALID_INPUT_ARCHIVE

The input archive entered is invalid. The input archive parameter must be in the form of -inputArchive=<n>where -n is an integer from 0 to 5.

57

ASUP_INVALID_OUTPUT_LOG

A valid output log was not specified.

58

ASUP_TRANSMISSION_FILE_COPY_ERROR

There was an error trying to copy the AutoSupport transmission log file. The transmission log either does not exist or there was an IO error trying to copy its data.

59

ASUP_DUPLICATE_NAMED_ARRAYS

More than one storage system with the same name was found. Please retry the command using the world-wide-name parameter, -w <WWID>.

60

ASUP_NO_SPECIFIED_ARRAY_FOUND

The specified storage system with the -n <storage-system-name> parameter is not present or is not supported for this command.

61

ASUP_NO_SPECIFIED_WWID_FOUND

The specified storage system with the -w <WWID> parameter is not present or is not supported for this command.

62

ASUP_FILTERED_TRANSMISSION_LOG_ERROR

There was an unknown error trying to obtain the filtered transmission log.

63

ASUP_TRANSMISSION_ARCHIVE_DOES_NOT_EXIST

The AutoSupport input archive transmission log specified with the-inputArchive=<n> parameter does not exist.

64

NO_VALID_REST_CLIENT_DISCOVERED

Unable to communicate with the storage system via https.

65

INVALID_CLI_VERSION

The client CLI version is not compatible with the CLI version running on the storage system.

66

INVALID_USERNAME_OR_PASSWORD

The username or password entered is invalid.

67

UNTRUSTED_CONNECTION

Unable to establish a secure connection to the storage system.

68

INVALID_PASSWORD_FILE

The password file cannot be found or is not readable.