This command applies to any individual storage system, including the HB2100/HB2200/HB2300, HB5100/HB5200, AB6100 and AB3100 series, as long as all SMcli packages are installed.

Roles

To execute this command on an HB2100/HB2200/HB2300, HB5100/HB5200, AB6100, or AB3100 storage system, you must have the Storage Admin or Storage Monitor role.

Syntax

show (allVolumes | volume [volumeName] |
volumes [volumeName1 ... volumeNameN])
(consumedCapacity |
(expansionHistory [file=fileName]))

Parameters

Parameter Description

Parameter	Description
`allVolumes`	This parameter returns information about all of the thin volumes in the storage system.
`volume`	The name of a thin volume for which you are retrieving information. Enclose the thin volume name in square brackets ([ ]). If the thin volume name has special characters or numbers, you must enclose the thin volume name in double quotation marks (" ") inside square brackets.
`volumes`	The names of several thin volumes for which you want to retrieve information. Enter the names of the volumes using these rules: Enclose all of the names in square brackets ([ ]). Separate each of the names with a space. If the volume names have special characters or numbers, enter the names using these rules: Enclose all of the names in square brackets ([ ]). Enclose each of the names in double quotation marks (" "). Separate each of the names with a space.
`consumedCapacity`	The setting to return a concise list of information about the consumed capacity of the thin volumes.
`expansionHistory`	The setting to return a concise list of information about the expansion history of the thin volumes.
`file`	The `file` parameter specifies a file to log the output of the `expansionHistory` parameter. The `file` is valid only when used with the `expansionHistory` parameter. An invalid file name causes the command to fail.

allVolumes

This parameter returns information about all of the thin volumes in the storage system.

volume

The name of a thin volume for which you are retrieving information. Enclose the thin volume name in square brackets ([ ]). If the thin volume name has special characters or numbers, you must enclose the thin volume name in double quotation marks (" ") inside square brackets.

volumes

The names of several thin volumes for which you want to retrieve information. Enter the names of the volumes using these rules:

Enclose all of the names in square brackets ([ ]).
Separate each of the names with a space.

If the volume names have special characters or numbers, enter the names using these rules:

Enclose all of the names in square brackets ([ ]).
Enclose each of the names in double quotation marks (" ").
Separate each of the names with a space.

consumedCapacity

The setting to return a concise list of information about the consumed capacity of the thin volumes.

expansionHistory

The setting to return a concise list of information about the expansion history of the thin volumes.

file

The file parameter specifies a file to log the output of the expansionHistory parameter. The file is valid only when used with the expansionHistory parameter. An invalid file name causes the command to fail.

Notes

With the expansionHistory parameter, the command returns information similar to the example shown below.

Thin volume name: volume-nameRepository volume Name: REPOS_NNNN

Logged Time	Expansion Type	Start Capacity	End Capacity
MM/DD/YYYY HH:MM:SS	Manual\|Automatic	NNNNNNNN bytes	NNNNNNNN bytes

Logged Time

Expansion Type

Start Capacity

End Capacity

MM/DD/YYYY HH:MM:SS

Manual|Automatic

NNNNNNNN bytes

With the consumedCapacity parameter, the command returns information similar to the example shown below.

Volume Provisioned Capacity Consumed Capacity Quota % Prov.Consumed

Volume	Provisioned Capacity	Consumed Capacity	Quota	% Prov.Consumed
`volumeName`	500.000 GB	230.000 GB	700.000 GB	46%

volumeName

500.000 GB

230.000 GB

700.000 GB

46%

SANtricity 11.8 Commands ( CA08871-194 ～ 196 )

Show thin volume

Supported Series

Roles

Syntax

Parameters

Notes

On this page