SANtricity 11.9 Commands ( CA08871-194 ~ 196 )

Test syslog configuration

The start syslog test command sends a sample message to test the syslog configuration.

Supported Series

This command applies to an individual ETERNUS AB/HB series storage system.

Roles

To execute this command on the ETERNUS AB/HB series storage system, you must have the Storage Admin or Support Admin role.

Syntax

start syslog test

Parameters

None.

Examples

SMcli -n Array1 -c "start syslog test;"

The sample alert message was successfully sent to the syslog servers.

SMcli completed successfully.
Top of Page