SANtricity 11.9 Commands ( CA08871-194 ~ 196 )

Deactivate synchronous mirroring

The deactivate storageArray feature command deactivates the synchronous mirroring feature, disassembles the mirror repository volume, and releases the controller owner of the secondary volume.

Supported Series

This command applies to any individual storage system, including the ETERNUS AB/HB series as long as all SMcli packages are installed.

Roles

To execute this command on the ETERNUS AB/HB series storage system, you must have the Storage Admin or Support Admin role.

Context

The controller host port that is dedicated to the secondary volume is available for host data transfers.

In previous versions of this command the feature identifier was remoteMirror. This feature identifier is no longer valid and is replaced by syncMirror.

Syntax

deactivate storageArray feature=syncMirror

Parameters

None.

Minimum firmware level

11.80 adds ETERNUS AB3100 and ETERNUS AB6100 system support

Top of Page