SANtricity 11.8 Commands
Specify AutoSupport HTTP(S) delivery method (for individual HB2100/HB2200/HB2300 or HB5100/HB5200 series)
The set storageArray autoSupport deliveryMethod
command sets up the delivery method for sending AutoSupport messages to HTTP(S).
Supported Series
This command applies to an individual HB2100/HB2200/HB2300, HB5100/HB5200, AB6100 or AB3100 storage system.
Roles
To execute this command on an HB2100/HB2200/HB2300, HB5100/HB5200, AB6100, or AB3100 storage system, you must have the Storage Admin or Support Admin role.
Syntax
set storageArray autoSupport deliveryMethod={HTTP | HTTPS} {direct | proxyConfigScript="proxyConfigScriptUrl" | proxyServer hostAddress=address portNumber=portNumber [userName="username" password="password"]}
Parameters
Parameter | Description | ||
---|---|---|---|
|
Allows the user to specify the delivery method for AutoSupport collection. Valid choices are:
|
||
|
Allows the user to connect directly to the destination Fujitsu Support systems using the HTTP or HTTPS protocol. |
||
|
Allows the user to specify the location of a Proxy Auto-Configuration (PAC) script file |
||
|
Allows the user to specify the HTTP(S) proxy server details required for establishing connection with the destination Fujitsu Support system. |
||
|
Allows the user to specify the proxy server’s host address. Required if proxyServer is used. |
||
|
Allows the user to specify the proxy server’s port number. Required if proxyServer is used. |
||
|
Allows the user to specify the proxy server’s username if it is configured. |
||
|
Allows the user to specify the proxy server’s password if it is configured. |
Examples
SMcli -n Array1 -c "set storageArray autoSupport deliveryMethod=HTTP direct;" SMcli -n Array1 -c "set storageArray autoSupport deliveryMethod=HTTP proxyConfigScript=\"http://company.com/~username/proxy.pac\";" SMcli -n Array1 -c "set storageArray autoSupport deliveryMethod=HTTPS proxyServer hostAddress=10.117.12.112 portNumber=8080 userName=\"tracyt\" password=\"1234456\";" SMcli completed successfully.
Verification
Send a test message using the start storageArray autoSupport deliveryTest
command to verify that your delivery methods are set up correctly.