SANtricity 11.9 Commands ( CA08871-194 ~ 196 )

Activate asynchronous mirroring

The activate storageArray feature command activates the Asynchronous Mirroring feature.

Supported Series

This command applies to any individual storage system, including the ETERNUS HB1100/HB1200, ETERNUS HB2100/HB2200/HB2300, ETERNUS HB5100/HB5200, ETERNUS AB6100 and ETERNUS AB3100 series, as long as all SMcli packages are installed.

This command is only applicable for asynchronous mirroring over Fibre Channel.

Roles

To execute this command on an ETERNUS HB1100/1200, ETERNUS HB2100/HB2200/HB2300, ETERNUS HB5100/HB5200, ETERNUS AB6100, or ETERNUS AB3100 storage system, you must have the Storage Admin role.

Context

After you activate the asynchronous mirroring feature, you must set up an asynchronous mirror group and an asynchronous mirrored pair.

Syntax

activate storageArray feature=asyncRemoteMirror

Parameters

None.

Minimum firmware level

11.80 adds AB6100 and AB3100 system support

Top of Page