SANtricity 11.9 Commands ( CA08871-194 ~ 196 )

Register SNMP community

The create snmpCommunity command creates a new Simple Network Management Protocol (SNMP) community, community name string and registers the new community as a known entity to the SNMP agent. Any attempt to register a new community with the same name as that of an existing community is rejected and the firmware returns an error message.

Supported Series

This command applies to an individual ETERNUS AB/HB series storage system.

Roles

To execute this command on the ETERNUS AB/HB series storage system, you must have the Storage Admin or Support Admin role.

Syntax

create snmpCommunity communityName="snmpCommunityName"

Parameters

Parameter Description

communityName

The name of the SNMP community that you want to create. Enclose the SNMP community name in double quotation marks (" ").

Top of Page