SANtricity 11.9 Commands ( CA08871-194 ~ 196 )

Stop SSD cache locate

The stop ssdCache locate command turns off the indicator lights on the Solid State Disks (SSDs) that were turned on by the start ssdCache locate command.

Supported Series

This command applies to any individual storage system, including the ETERNUS AB/HB series as long as all SMcli packages are installed.

Roles

To execute this command on the ETERNUS AB/HB series storage system, you must have the Support Admin role.

Syntax

stop ssdCache locate

Parameters

None.

Minimum firmware level

11.80 adds ETERNUS AB3100 and ETERNUS AB6100 support

Top of Page