SANtricity 11.9 Commands ( CA08871-194 ~ 196 )

Stop volume group locate

The stop volumeGroup locate command turns off the indicator lights on the drives that were turned on by the start volumeGroup locate command.

Supported Series

This command applies to any individual storage system, including the ETERNUS HB1100/HB1200, ETERNUS HB2100/HB2200/HB2300, ETERNUS HB5100/HB5200, ETERNUS AB6100 and ETERNUS AB3100 series, as long as all SMcli packages are installed.

Roles

To execute this command on an ETERNUS HB1100/HB1200, ETERNUS HB2100/HB2200/HB2300, ETERNUS HB5100/HB5200, ETERNUS AB6100 or ETERNUS AB3100 storage system, you must have the Storage Admin role.

Syntax

stop volumeGroup locate

Parameters

None.

Top of Page