SANtricity 11.9 Commands ( CA08871-194 ~ 196 )

Start storage system locate

The start storageArray locate command locates a storage system by turning on the indicator lights for the storage system.

Supported Series

This command applies to any individual storage system, including the ETERNUS AB3100, ETERNUS AB6100, ETERNUS HB1100/HB1200/HB1300/HB1400, ETERNUS HB2100/HB2200/HB2300/HB2400/HB2500/HB2600, and ETERNUS HB5100/HB5200, as long as all SMcli packages are installed.

Roles

To execute this command on an ETERNUS AB3100, ETERNUS AB6100, ETERNUS HB1100/HB1200/HB1300/HB1400, ETERNUS HB2100/HB2200/HB2300/HB2400/HB2500/HB2600, or ETERNUS HB5100/HB5200 storage system, you must have the Storage Admin role.

Context

Use the stop storageArray locate command to turn off the indicator lights for the storage system.

Syntax

start storageArray locate

Parameters

None.

Top of Page