SANtricity 11.9 Commands ( CA08871-194 ~ 196 )

Enable controller data transfer

The enable controller dataTransfer command revives a controller that has become quiesced while running diagnostics.

Supported Series

This command applies to any individual storage system, including the ETERNUS AB/HB series as long as all SMcli packages are installed.

Roles

To execute this command on the ETERNUS AB/HB series storage system, you must have the Storage Admin role.

Syntax

enable controller [(a|b)] dataTransfer

Parameter

Parameter Description

controller

The controller that you want to revive. Valid controller identifiers are a or b, where a is the controller in slot A, and b is the controller in slot B. Enclose the controller identifier in square brackets ([ ]). If you do not specify a controller, the storage management software returns a syntax error.

Top of Page