SANtricity 11.8 Commands
Show volume
The show volume summary
command returns information about a volume.
Supported Series
This command applies to any individual storage system, including the HB2100/HB2200/HB2300, HB5100/HB5200, AB6100 and AB3100 series, as long as all SMcli packages are installed.
Roles
To execute this command on an HB2100/HB2200/HB2300, HB5100/HB5200, AB6100, or AB3100 storage system, you must have the Storage Admin or Storage Monitor role.
Context
For the volumes in a storage system, this command returns the following information:
-
The number of volumes
-
The name
-
The status
-
The capacity
-
The RAID level
-
The volume group where the volume is located
-
Details:
-
The volume ID
-
The subsystem ID
-
The drive type (SAS)
-
Tray loss protection
-
The preferred owner
-
The current owner
-
The segment size
-
The modification priority
-
The read cache status (enabled or disabled)
-
The write cache status (enabled or disabled)
-
The write cache without batteries status (enabled or disabled)
-
The write cache with mirror status (enabled or disabled)
-
The flush write cache after time
-
The cache read prefetch setting (TRUE or FALSE)
-
The enable background media scan status (enabled or disabled)
-
The media scan with redundancy check status (enabled or disabled)
-
-
The mirror repository volumes
Syntax
show (allVolumes | volume [volumeName] | volumes [volumeName1 ... volumeNameN]) summary
Parameters
Parameter | Description |
---|---|
|
This parameter returns performance statistics about all of the volumes in the storage system. |
|
The name of a volume for which you want to retrieve information. Enclose the volume name in square brackets ([ ]). If the volume name has special characters or numbers, you must enclose the name in double quotation marks (" ") inside square brackets. |
|
The names of several volumes for which you want to retrieve information. Enter the names of the volumes using these rules:
If the volume names have special characters or numbers, enter the names using these rules:
|
|
The setting to return a concise list of information about the volumes. |