SANtricity 11.8 Commands ( CA08871-194 ～ 196 )

Create synchronous mirroring

This command is not supported.

The create syncMirror command creates both the primary volume and the secondary volume for a synchronous remote mirrored pair. This command also sets the write mode (synchronous write mode or asynchronous write mode) and the synchronization priority.

Supported Series

This command applies to any individual storage system, with some restrictions.

If you are running the command on the HB2100/HB2200/HB2300 or HB5100/HB5200 series, the client type must be set to symbol. This command will not execute if they client type is set to https.

Roles

To execute this command on an HB2100/HB2200/HB2300 or HB5100/HB5200 storage system, you must have the Storage Admin role.

Context

In previous versions of this command the feature identifier was remoteMirror. This feature identifier is no longer valid and is replaced by syncMirror.

Syntax

create syncMirror primary="primaryVolumeName"
secondary="secondaryVolumeName"
(remoteStorageArrayName="storageArrayName" |
remoteStorageArrayWwn="wwID")
[remotePassword="password"]
[syncPriority=(highest | high | medium | low | lowest)]
[autoResync=(enabled | disabled)]
[writeOrder=(preserved | notPreserved)]
[writeMode=(synchronous | asynchronous)]
[role=(primary | secondary)]
[force=(TRUE | FALSE)]

Parameters

Parameter Description

Parameter	Description
`primary`	The name of an existing volume on the local storage system that you want to use for the primary volume. Enclose the primary volume name in double quotation marks (" ").
`secondary`	The name of an existing volume on the remote storage system that you want to use for the secondary volume. Enclose the secondary volume name in double quotation marks (" ").
`remoteStorageArrayName`	The name of the remote storage system. Enclose the remote storage system name in double quotation marks (" ").
`remoteStorageArrayWwn`	The World Wide Identifier (WWID) of the remote storage system. Enclose the WWID in double quotation marks (" ").
`remotePassword`	The password for the remote storage system. Use this parameter when the remote storage system is password protected. Enclose the password in double quotation marks (" ").
`syncPriority`	The priority that full synchronization has relative to host I/O activity. Valid values are `highest`, `high`, `medium`, `low`, or `lowest`.
`autoResync`	The settings for automatic resynchronization between the primary volumes and the secondary volumes of a remote-mirror pair. This parameter has these values: `enabled` — Automatic resynchronization is turned on. You do not need to do anything further to resynchronize the primary volume and the secondary volume. `disabled` — Automatic resynchronization is turned off. To resynchronize the primary volume and the secondary volume, you must run the `resume syncMirror` command.
`writeOrder`	The write order for data transmission between the primary volume and the secondary volume. Valid values are `preserved` or `notPreserved`.
`writeMode`	How the primary volume writes to the secondary volume. Valid values are `synchronous` or `asynchronous`.
`role`	Use this parameter to promote the asynchronous mirror group to a primary role or demote the asynchronous mirror group to a secondary role. To define the asynchronous mirror group as the primary role, set this parameter to `primary`. To define the asynchronous mirror group as the secondary role, set this parameter to `secondary`.
`force`	The role reversal is forced if the communications link between the storage systems is down and promotion or demotion on the local side results in a dual-primary condition or a dual-secondary condition. To force a role reversal, set this parameter to `TRUE`. The default value is `FALSE`.

primary

The name of an existing volume on the local storage system that you want to use for the primary volume. Enclose the primary volume name in double quotation marks (" ").

secondary

The name of an existing volume on the remote storage system that you want to use for the secondary volume. Enclose the secondary volume name in double quotation marks (" ").

remoteStorageArrayName

The name of the remote storage system. Enclose the remote storage system name in double quotation marks (" ").

remoteStorageArrayWwn

The World Wide Identifier (WWID) of the remote storage system. Enclose the WWID in double quotation marks (" ").

remotePassword

The password for the remote storage system. Use this parameter when the remote storage system is password protected. Enclose the password in double quotation marks (" ").

syncPriority

The priority that full synchronization has relative to host I/O activity. Valid values are highest, high, medium, low, or lowest.

autoResync

The settings for automatic resynchronization between the primary volumes and the secondary volumes of a remote-mirror pair. This parameter has these values:

enabled — Automatic resynchronization is turned on. You do not need to do anything further to resynchronize the primary volume and the secondary volume.
disabled — Automatic resynchronization is turned off. To resynchronize the primary volume and the secondary volume, you must run the resume syncMirror command.

writeOrder

The write order for data transmission between the primary volume and the secondary volume. Valid values are preserved or notPreserved.

writeMode

How the primary volume writes to the secondary volume. Valid values are synchronous or asynchronous.

role

Use this parameter to promote the asynchronous mirror group to a primary role or demote the asynchronous mirror group to a secondary role. To define the asynchronous mirror group as the primary role, set this parameter to primary. To define the asynchronous mirror group as the secondary role, set this parameter to secondary.

force

The role reversal is forced if the communications link between the storage systems is down and promotion or demotion on the local side results in a dual-primary condition or a dual-secondary condition. To force a role reversal, set this parameter to TRUE. The default value is FALSE.

Notes

You can use any combination of alphanumeric characters, hyphens, and underscores for the names. Names can have a maximum of 30 characters.

When you choose the primary volume and the secondary volume, the secondary volume must be of equal or greater size than the primary volume. The RAID level of the secondary volume does not have to be the same as the primary volume.

Passwords are stored on each storage system in a management domain. If a password was not previously set, you do not need a password. The password can be any combination of a alphanumeric characters with a maximum of 30 characters. (You can define a storage system password by using the set storageArray command.)

Synchronization priority defines the amount of system resources that are used to synchronize the data between the primary volume and the secondary volume of a mirror relationship. If you select the highest priority level, the data synchronization uses the most system resources to perform the full synchronization, which decreases performance for host data transfers.

The writeOrder parameter applies only to asynchronous write modes and makes the mirrored pair part of a consistency group. Setting the writeOrder parameter to preserved causes the remote mirrored pair to transmit data from the primary volume to the secondary volume in the same order as the host writes to the primary volume. In the event of a transmission link failure, the data is buffered until a full synchronization can occur. This action can require additional system overhead to maintain the buffered data, which slows operations. Setting the writeOrder parameter to notPreserved frees the system from having to maintain data in a buffer, but it requires forcing a full synchronization to make sure that the secondary volume has the same data as the primary volume.