SANtricity 11.9 Commands ( CA08871-194 ~ 196 )

Reset storage system volume distribution

The reset storageArray volumeDistribution command reassigns (moves) all of the volumes to their preferred controller.

Supported Series

This command applies to any individual storage system, including the ETERNUS AB/HB series as long as all SMcli packages are installed.

Roles

To execute this command on the ETERNUS AB/HB series storage system, you must have the Storage Admin role.

Syntax

reset storageArray volumeDistribution

Parameters

None.

Notes

If you use this command on a host without a multi-path driver, you must stop I/O operations to the volumes until this command has completed to prevent application errors.

Under certain host operating system environments, you might be required to reconfigure the multi-path host driver. You might also need to make operating system modifications to recognize the new I/O path to the volumes.

Top of Page