This command applies to any individual storage system, including the HB2100/HB2200/HB2300, HB5100/HB5200, AB6100 and AB3100 series, as long as all SMcli packages are installed.

Roles

To execute this command on an HB2100/HB2200/HB2300, HB5100/HB5200, AB6100, or AB3100 storage system, you must have the Storage Admin or Storage Monitor role.

Context

For each volume in the storage system, this command returns the following information:

Storage Systems
Total IOs/s
Read %
Primary Read Cache Hit %
Primary Write Cache Hit %
SSD Cache Hit %
Current MBs/s
Maximum MBs/s
Current IOs/s
Maximum IOs/s
Minimum IOs/s
Average IOs/s
Minimum MBs/s
Average MBs/s
Current IO Latency
Maximum IO Latency
Minimum IO Latency
Average IO Latency

Syntax

show (allVolumes | volume ["volumeName"]
volumes ["volumeName1" ... "volumeNameN"]) performanceStats

Parameters

Parameter Description

Parameter	Description
`allVolumes`	The parameter to return performance statistics about all of the volumes in the storage system.
`volume`	The name of a volume for which you want to retrieve information. Enclose the volume name in square brackets ([ ]). If the volume name has special characters or numbers, you must enclose the name in double quotation marks (" ") inside square brackets.
`volumes`	The names of several volumes for which you want to retrieve information. Enter the names of the volumes using these rules: Enclose all of the names in square brackets ([ ]). Separate each of the names with a space. If the volume names have special characters or numbers, enter the names using these rules: Enclose all of the names in square brackets ([ ]). Enclose each of the names in double quotation marks (" "). Separate each of the names with a space.

allVolumes

The parameter to return performance statistics about all of the volumes in the storage system.

volume

The name of a volume for which you want to retrieve information. Enclose the volume name in square brackets ([ ]). If the volume name has special characters or numbers, you must enclose the name in double quotation marks (" ") inside square brackets.

volumes

The names of several volumes for which you want to retrieve information. Enter the names of the volumes using these rules:

Enclose all of the names in square brackets ([ ]).
Separate each of the names with a space.

If the volume names have special characters or numbers, enter the names using these rules:

Enclose all of the names in square brackets ([ ]).
Enclose each of the names in double quotation marks (" ").
Separate each of the names with a space.

Notes

Before you run the show volume performanceStat command, run the set session performanceMonitorInterval command and the set session performanceMonitorIterations command to define how often you collect the statistics.

The show volume performanceStat command returns volume performance statistics as shown in this example:

Performance Monitor Statistics for Storage System: Tyler -
Date/Time: 11/6/12 10:00: 34 AM - Polling interval in seconds: 5


"Storage Systems","Total IOs","Read %","Primary Read Cache Hit %",
"Primary Write Cache Hit %","SSD Read Cache Hit %","Current MBs/sec",
"Maximum MBs/sec","Current IOs/sec","Maximum IOs/sec","Minimum IOs/sec",
"Average IOs/sec","Minimum MBs/sec","Average MBs/sec","Current IO Latency",
"Maximum IO Latency","Minimum IO Latency","Average IO Latency"

"Capture Iteration: 1","","","","","","","","","","","","","","","","",""
"Date/Time: 11/6/12 10:00:34 AM","","","","","","","","","","","","","","",
   "","","""Volume Unnamed","0.0","","0.0","0.0","0.0","0.0","0.0","0.0","0.0","0.0",
   "0.0","0.0","0.0","0.0","0.0","0.0","0.0"

SANtricity 11.8 Commands ( CA08871-194 ～ 196 )

Show volume performance statistics

Supported Series

Roles

Context

Syntax

Parameters

Notes

On this page