SANtricity 11.8 Commands ( CA08871-194 ~ 196 )

Set storage Array time

The set storageArray time command sets the clocks on both controllers in a storage system by synchronizing the controller clocks with the clock of the host from which you run this command.

Supported Series

This command applies to any individual storage system, including the HB2100/HB2200/HB2300, HB5100/HB5200, AB6100 and AB3100 series, as long as all SMcli packages are installed.

Roles

To execute this command on an HB2100/HB2200/HB2300, HB5100/HB5200, AB6100, or AB3100 storage system, you must have the Storage Admin role.

Syntax

set storageArray time

Parameters

None.

Top of Page