SANtricity 11.8 Commands

to Japanese version

Start volume group defragment

The start volumeGroup defragment command starts a defragment operation on the specified volume group.

Supported Series

This command applies to any individual storage system, including the HB2100/HB2200/HB2300, HB5100/HB5200, AB6100 and AB3100 series, as long as all SMcli packages are installed.

Roles

To execute this command on an HB2100/HB2200/HB2300, HB5100/HB5200, AB6100, or AB3100 storage system, you must have the Storage Admin role.

Context

Defragmenting a volume group starts a long-running operation that you cannot stop.

Syntax

start volumeGroup [volumeGroupName] defragment

Parameter

Parameter Description

volumeGroup

The name of the volume group that you want to defragment. Enclose the volume group name in square brackets ([ ]).

Notes

Host I/O errors might result in the volume groups with more than 32 volumes. This operation also might result in internal controller reboots because the timeout period ends before the volume group definition is set. If you experience this issue, quiesce the host I/O operations, and try the command again.

Top of Page