This command displays path information for every initiator port connected to a tape library. The output is similar to the storage library path show command but the output is listed by initiator.

Parameters

{ [-fields <fieldname>,…]: fields used to be used in this display
| [-instance ] }: If you specify the -instance parameter, the command displays detailed information about all fields.
[-node {<nodename>|local}] - Controller name: The name of the clustered node for which information is being displayed.
[-initiator <text>] - Initiator Port: Initiator port that the clustered node uses.
[-target-wwpn <text>] - Target Port: Target World Wide Port Name. Port on the storage tape library that is being used.
[-initiator-side-switch-port <text>] - Initiator Side Switch Port: Switch port connected to the clustered node.
[-target-side-switch-port <text>] - Target Side Switch Port: Switch port connected to the tape library.
[-array-name <array name>] - Library Name: Name of the storage tape library that is connected to the cluster.
[-tpgn <integer>] - Target Port Group Number: TPGN refers to the target port group to which the target port belongs. A target port group is a set of target ports which share the same LUN access characteristics and failover behaviors.
[-port-speed <text>] - Port Speed: Port Speed of the specified port.
[-path-io-kbps <integer>] - Kbytes of I/O per second on Path (Rolling Average): Rolling average of Kbytes of I/O per second on the library path.
[-path-iops <integer>] - Number of I/O per second on Path (Rolling Average): Rolling average of I/O per second on the library path.
[-initiator-io-kbps <integer>] - Kbytes of I/O per second on Initiator (Rolling Average): Rolling average of Kbytes of I/O per second on the initiator port.
[-initiator-iops <integer>] - Number of I/O per second on Initiator (Rolling Average): >Rolling average of I/O per second on the initiator port.
[-target-io-kbps <integer>] - Kbytes of I/O per second to Target (Rolling Average): Rolling average of Kbytes of I/O per second on the target port.
[-target-iops <integer>] - Number of I/O per second to Target (Rolling Average): Rolling average of I/O per second on the target port.

Examples

The following example displays the path information by initiator for a storage tape library.

cluster1::> storage tape library path show-by-initiator
Node: cluster1-01
          Initiator I/O       Initiator Side     Path I/O          Target Side   Target I/O
Initiator        (KB/s)          Switch Port       (KB/s)          Switch Port       (KB/s)      Target Port Library Name
--------- ------------- -------------------- ------------ -------------------- ------------ ---------------- ----------------
0b                    0 sw_tape:6                       0            sw_tape:0            0 510a09800000412d TAPE_LIB_1
                                                                     sw_tape:1            0 510a09820000412d TAPE_LIB_1
3d                    0 N/A                             0                  N/A            0 50050763124b4d6f TAPE_LIB_2
3 entries were displayed.