ONTAP 9.14.1 commands

system controller config show-errors

Display configuration errors

Availability: This command is available to cluster administrators at the admin privilege level.

Description

The system controller config show-errors displays configuration errors.

  • node

  • description

To display more details, use the -instance parameter.

Parameters

{ [-fields <fieldname>,…​]

Selects the fields that you specify.

| [-instance ] }

Displays detailed information for all the PCI devices.

[-node {<nodename>|local}] - Node

Displays configuration errors on the specified node.

[-verbose <true>] - Verbose Output?

The -verbose parameter enables verbose mode, resulting in the display of more detailed output.

[-description <text>] - Error Description

Displays the node with the specified configuration error.

Examples

The example below displays configuration errors on all the nodes in the cluster.

cluster1::> system controller config show-errors

Configuration Info and Errors for Node: cluster1-01
------------------------------------------------------------------------------

Configuration Info and Errors for Node: cluster1-02
------------------------------------------------------------------------------


cluster1::>

cluster1::> system controller config show-errors -verbose

Configuration Info and Errors for Node: cluster1-01
------------------------------------------------------------------------------
sysconfig: Card in slot 2 (7-1275-0008-46848) is not supported.
sysconfig: slot 12 OK: X2067: Proprietary embedded SAS HBA

cluster1::>
Top of Page