ONTAP 9.14.1 commands

vserver iscsi interface modify

Modify network interfaces used for iSCSI connectivity

Availability: This command is available to cluster and Vserver administrators at the advanced privilege level.


The vserver iscsi interface modify command modifies the iSCSI specific configuration for an iSCSI LIF.


-vserver <Vserver Name> - Vserver

Specifies the Vserver.

-lif <lif-name> - Logical Interface

Use this parameter to specify the logical interface on a Vserver that you want to modify.

[-sendtargets-fqdn <text>] - iSCSI Discovery SendTargets FQDN

Use this parameter to specify the Fully Qualified Domain Name (FQDN) to return during an iSCSI Discovery SendTargets operation. To clear the FQDN, set this parameter to "". If unset, the IP address of the LIF is used in iSCSI SendTargets discovery.
This is not part of iSNS and will not affect the iSNS configuration.


The following example modifies the sendtargets-fqdn of the iSCSI LIF vs1_iscsi1 for Vserver vs1 to myhost.example.com.

cluster1::> vserver iscsi interface modify -vserver vs1 -lif vs1_iscsi1 -sendtargets_fqdn myhost.example.com
Top of Page