You can use the cluster peer create command to create a peer relationship between a local and remote cluster. After the peer relationship has been created, you can run cluster peer create on the remote cluster to authenticate it to the local cluster.

Before you begin

You must have created intercluster LIFs on every node in the clusters that are being peered.
The clusters must be running ONTAP 9.7 or later.

Steps

Perform this task using ONTAP System Manager or the ONTAP CLI.

ONTAP System Manager

In the local cluster, click Cluster > Settings.
In the Intercluster Settings section, click Add Network Interfaces and add intercluster network interfaces for the cluster.

Repeat this step on the remote cluster.
In the remote cluster, click Cluster > Settings.
Click in the Cluster Peers section and select Generate Passphrase.
Select the remote ONTAP cluster version.
Copy the generated passphrase.
In the local cluster, under Cluster peers, click and select Peer cluster.
In the Peer cluster window, paste the passphrase and click Initiate cluster peering.

CLI

On the destination cluster, create a peer relationship with the source cluster:

cluster peer create -generate-passphrase -offer-expiration <MM/DD/YYYY HH:MM:SS>|1...7days|1...168hours -peer-addrs <peer_LIF_IPs > -initial-allowed-vserver-peers <svm_name>|* -ipspace <ipspace>

If you specify both -generate-passphrase and -peer-addrs, only the cluster whose intercluster LIFs are specified in -peer-addrs can use the generated password.

You can ignore the -ipspace option if you are not using a custom IPspace. For complete command syntax, see the man page.

If you are creating the peering relationship in ONTAP 9.7 or later and you do not want cross-cluster peering communications to be encrypted, you must use the -encryption-protocol-proposed none option to disable encryption.

The following example creates a cluster peer relationship with an unspecified remote cluster, and pre-authorizes peer relationships with SVMs vs1 and vs2 on the local cluster:

cluster02::> cluster peer create -generate-passphrase -offer-expiration 2days -initial-allowed-vserver-peers vs1,vs2

                     Passphrase: UCa+6lRVICXeL/gq1WrK7ShR
                Expiration Time: 6/7/2017 08:16:10 EST
  Initial Allowed Vserver Peers: vs1,vs2
            Intercluster LIF IP: 192.140.112.101
              Peer Cluster Name: Clus_7ShR (temporary generated)

Warning: make a note of the passphrase - it cannot be displayed again.

The following example creates a cluster peer relationship with the remote cluster at intercluster LIF IP addresses 192.140.112.103 and 192.140.112.104, and pre-authorizes a peer relationship with any SVM on the local cluster:

cluster02::> cluster peer create -generate-passphrase -peer-addrs 192.140.112.103,192.140.112.104 -offer-expiration 2days -initial-allowed-vserver-peers *

                     Passphrase: UCa+6lRVICXeL/gq1WrK7ShR
                Expiration Time: 6/7/2017 08:16:10 EST
  Initial Allowed Vserver Peers: vs1,vs2
            Intercluster LIF IP: 192.140.112.101,192.140.112.102
              Peer Cluster Name: Clus_7ShR (temporary generated)

Warning: make a note of the passphrase - it cannot be displayed again.

The following example creates a cluster peer relationship with an unspecified remote cluster, and pre-authorizes peer relationships with SVMsvs1 and vs2 on the local cluster:

cluster02::> cluster peer create -generate-passphrase -offer-expiration 2days -initial-allowed-vserver-peers vs1,vs2

                     Passphrase: UCa+6lRVICXeL/gq1WrK7ShR
                Expiration Time: 6/7/2017 08:16:10 EST
  Initial Allowed Vserver Peers: vs1,vs2
            Intercluster LIF IP: 192.140.112.101
              Peer Cluster Name: Clus_7ShR (temporary generated)

Warning: make a note of the passphrase - it cannot be displayed again.

On source cluster, authenticate the source cluster to the destination cluster:

cluster peer create -peer-addrs <peer_LIF_IPs> -ipspace <ipspace>

For complete command syntax, see the man page.

The following example authenticates the local cluster to the remote cluster at intercluster LIF IP addresses 192.140.112.101 and 192.140.112.102:

cluster01::> cluster peer create -peer-addrs 192.140.112.101,192.140.112.102

Notice: Use a generated passphrase or choose a passphrase of 8 or more characters.
        To ensure the authenticity of the peering relationship, use a phrase or sequence of characters that would be hard to guess.

Enter the passphrase:
Confirm the passphrase:

Clusters cluster02 and cluster01 are peered.

Enter the passphrase for the peer relationship when prompted.

Verify that the cluster peer relationship was created:

cluster peer show -instance

cluster01::> cluster peer show -instance

                               Peer Cluster Name: cluster02
                   Remote Intercluster Addresses: 192.140.112.101, 192.140.112.102
              Availability of the Remote Cluster: Available
                             Remote Cluster Name: cluster2
                             Active IP Addresses: 192.140.112.101, 192.140.112.102
                           Cluster Serial Number: 1-80-123456
                  Address Family of Relationship: ipv4
            Authentication Status Administrative: no-authentication
               Authentication Status Operational: absent
                                Last Update Time: 02/05 21:05:41
                    IPspace for the Relationship: Default

Check the connectivity and status of the nodes in the peer relationship:

cluster peer health show

cluster01::> cluster peer health show
Node       cluster-Name                Node-Name
             Ping-Status               RDB-Health Cluster-Health  Avail…
---------- --------------------------- ---------  --------------- --------
cluster01-01
           cluster02                   cluster02-01
             Data: interface_reachable
             ICMP: interface_reachable true       true            true
                                       cluster02-02
             Data: interface_reachable
             ICMP: interface_reachable true       true            true
cluster01-02
           cluster02                   cluster02-01
             Data: interface_reachable
             ICMP: interface_reachable true       true            true
                                       cluster02-02
             Data: interface_reachable
             ICMP: interface_reachable true       true            true

Other ways to do this in ONTAP

To perform these tasks with…	See this content…
The redesigned ONTAP System Manager (available with ONTAP 9.7 and later)	Prepare for mirroring and vaulting

To perform these tasks with…

See this content…

The redesigned ONTAP System Manager (available with ONTAP 9.7 and later)

Prepare for mirroring and vaulting

ONTAP 9 Manuals ( CA08871-402 )

Create a cluster peer relationship

Other ways to do this in ONTAP

On this page