You must specify a number of parameters for the S3 auditing configuration or accept the defaults. In particular, you should consider which log rotation parameters will help ensure adequate free space.

See the vserver object-store-server audit create man page for syntax details.

General parameters

There are two required parameters that you must specify when you create the auditing configuration. There are also three optional parameters that you can specify.

Type of information	Option	Required
SVM name Name of the SVM on which to create the auditing configuration. The SVM must already exist and be enabled for S3.	`-verserver svm_name`	Yes
Log destination path Specifies where the converted audit logs are stored. The path must already exist on the SVM. The path can be up to 864 characters in length and must have read-write permissions. If the path is not valid, the audit configuration command fails.	`-destination text`	Yes
Categories of events to audit The following event categories can be audited: data GetObject, PutObject, and DeleteObject events management PutBucket and DeleteBucket events The default is to audit data events only.	`-events {data\|management}, …`	No

Type of information

Option

Required

SVM name

Name of the SVM on which to create the auditing configuration.

The SVM must already exist and be enabled for S3.

-verserver svm_name

Yes

Log destination path

Specifies where the converted audit logs are stored. The path must already exist on the SVM.

The path can be up to 864 characters in length and must have read-write permissions.

If the path is not valid, the audit configuration command fails.

-destination text

Yes

Categories of events to audit

The following event categories can be audited:

data GetObject, PutObject, and DeleteObject events
management PutBucket and DeleteBucket events

The default is to audit data events only.

-events {data|management}, …

You can enter one of the following parameters to control the number of audit log files. If no value is entered, all log files are retained.

Type of information	Option	Required
Log files rotation limit Determines how many audit log files to retain before rotating the oldest log file out. For example, if you enter a value of 5, the last five log files are retained. A value of 0 indicates that all the log files are retained. The default value is 0.	`-rotate-limit integer`	No
Log files duration limit Determines how long a log file can be retained before being deleted. For example, if you enter a value of 5d0h0m, logs more than 5 days old are deleted. A value of 0 indicates that all the log files are retained. The default value is 0.	`-retention duration integer_time`	No

Type of information

Option

Required

Log files rotation limit

Determines how many audit log files to retain before rotating the oldest log file out. For example, if you enter a value of 5, the last five log files are retained.

A value of 0 indicates that all the log files are retained. The default value is 0.

-rotate-limit integer

Log files duration limit

Determines how long a log file can be retained before being deleted. For example, if you enter a value of 5d0h0m, logs more than 5 days old are deleted.

A value of 0 indicates that all the log files are retained. The default value is 0.

-retention duration integer_time

Parameters for audit log rotation

You can rotate audit logs based on size or schedule. The default is to rotate audit logs based on size.

Rotate logs based on log size

If you want to use the default log rotation method and the default log size, you do not need to configure any specific parameters for log rotation. The default log size is 100 MB.

If you do not want to use the default log size, you can configure the -rotate-size parameter to specify a custom log size.

If you want to reset the rotation based on a log size alone, use the following command to unset the -rotate-schedule-minute parameter:

vserver audit modify -vserver svm_name -destination / -rotate-schedule-minute -

Rotate logs based on a schedule

If you choose to rotate the audit logs based on a schedule, you can schedule log rotation by using the time-based rotation parameters in any combination.

If you use time-based rotation, the -rotate-schedule-minute parameter is mandatory.
All other time-based rotation parameters are optional.
- -rotate-schedule-month
- -rotate-schedule-dayofweek
- -rotate-schedule-day
- -rotate-schedule-hour
The rotation schedule is calculated by using all the time-related values. For example, if you specify only the -rotate-schedule-minute parameter, the audit log files are rotated based on the minutes specified on all days of the week, during all hours on all months of the year.
If you specify only one or two time-based rotation parameters (for example, -rotate-schedule-month and -rotate-schedule-minutes), the log files are rotated based on the minute values that you specified on all days of the week, during all hours, but only during the specified months.

For example, you can specify that the audit log is to be rotated during the months January, March, and August on all Mondays, Wednesdays, and Saturdays at 10:30 a.m.
If you specify values for both -rotate-schedule-dayofweek and -rotate-schedule-day, they are considered independently.

For example, if you specify -rotate-schedule-dayofweek as Friday and -rotate-schedule-day as 13, then the audit logs would be rotated on every Friday and on the 13th day of the specified month, not just on every Friday the 13th.
If you want to reset the rotation based on a schedule alone, use the following command to unset the -rotate-size parameter:

vserver audit modify -vserver svm_name -destination / -rotate-size -

Rotate logs based on log size and schedule

You can choose to rotate the log files based on log size and a schedule by setting both the -rotate-size parameter and the time-based rotation parameters in any combination. For example: if -rotate-size is set to 10 MB and -rotate-schedule-minute is set to 15, the log files rotate when the log file size reaches 10 MB or on the 15th minute of every hour (whichever event occurs first).

ONTAP 9 Manuals ( CA08871-402 )

Plan an S3 auditing configuration

General parameters

Parameters for audit log rotation

Rotate logs based on log size

Rotate logs based on a schedule

Rotate logs based on log size and schedule

On this page