ONTAP 9

to Japanese version

Configure LIFs for NFS over RDMA

To utilize NFS over RDMA, you must configure your LIFs (network interface) to be RDMA compatible. Both the LIF and its failover pair must be capable of supporting RDMA.

Create a new LIF

ONTAP System Manager

You must be running ONTAP 9.12.1 or later to create a network interface for NFS over RDMA with ONTAP System Manager.

Steps
  1. Select Network > Overview > Network Interfaces.

  2. Select add icon.

  3. When you select NFS,SMB/CIFS,S3, you will have the option to Use RoCE ports. Select the checkbox for Use RoCE ports.

  4. Select the storage VM and home node. Assign a name. Enter the IP address and subnet mask.

  5. Once you enter the IP address and subnet mask, ONTAP System Manager will filter the list of broadcast domains to those that have RoCE capable ports. Select a broadcast domain. You can optionally add a gateway.

  6. Select Save.

CLI
Steps
  1. Create a LIF:

    network interface create -vserver SVM_name -lif lif_name -service-policy service_policy_name -home-node node_name -home-port port_name {-address IP_address -netmask netmask_value | -subnet-name subnet_name} -firewall-policy policy_name -auto-revert {true|false} -rdma-protocols roce

    • The service policy must be either default-data-files or a custom policy that includes the data-nfs network interface service.

    • The -rdma-protocols parameter accepts a list, which is by default empty. When roce is added as a value, the LIF can only be configured on ports supporting RoCE offload, affecting bot LIF migration and failover.

Modify a LIF

ONTAP System Manager

You must be running ONTAP 9.12.1 or later to create a network interface for NFS over RDMA with ONTAP System Manager.

Steps
  1. Select Network > Overview > Network Interfaces.

  2. Select kabob icon > Edit beside the network interface you want to change.

  3. Check Use RoCE Ports to enable NFS over RDMA or uncheck the box to disable it. If the network interface is on a RoCE capable port, you will see a checkbox next to Use RoCE ports.

  4. Modify the other settings as needed.

  5. Select Save to confirm your changes.

CLI
  1. You can check the status of your LIFs with the network interface show command. The service policy must include the data-nfs network interface service. The -rdma-protocols list should include roce. If either of these conditions are untrue, modify the LIF.

  2. To modify the LIF, run:

    network interface modify vserver SVM_name -lif lif_name -service-policy service_policy_name -home-node node_name -home-port port_name {-address IP_address -netmask netmask_value | -subnet-name subnet_name} -firewall-policy policy_name -auto-revert {true|false} -rdma-protocols roce

Modifying a LIF to require a particular offload protocol when the LIF is not currently assigned to a port that supports that protocol will produce an error.

Migrate a LIF

ONTAP also allows you to migrate network interfaces (LIFs) to utilize NFS over RDMA. When performing this migration, you must ensure the destination port is RoCE capable. Beginning with ONTAP 9.12.1, you can complete this procedure in ONTAP System Manager. When selecting a destination port for the network interface, ONTAP System Manager will designate whether ports are RoCE capable.

You can only migrate a LIF to an NFS over RDMA configuration if:

  • It is an NFS RDMA network interface (LIF) hosted on a RoCE capable port.

  • It is an NFS TCP network interface (LIF) hosted on a RoCE capable port.

  • It is an NFS TCP network interface (LIF) hosted on a non-RoCE capable port.

For more information about migrating a network interface, refer to Migrate a LIF.

Top of Page