You can use the max-throughput field for a policy group to define a throughput ceiling for storage object workloads (QoS Max). You can apply the policy group when you create or modify the storage object.

What you’ll need

You must be a cluster administrator to create a policy group.
You must be a cluster administrator to apply a policy group to an SVM.

About this task

You can use a non-shared QoS policy group to specify that the defined throughput ceiling applies to each member workload individually. Otherwise, the policy group is shared: the total throughput for the workloads assigned to the policy group cannot exceed the specified ceiling.

Set -is-shared=false for the qos policy-group create command to specify a non-shared policygroup.
You can specify the throughput limit for the ceiling in IOPS, MB/s, or IOPS, MB/s. If you specify both IOPS and MB/s, whichever limit is reached first is enforced.

If you set a ceiling and a floor for the same workload, you can specify the throughput limit for the ceiling in IOPS only.
A storage object that is subject to a QoS limit must be contained by the SVM to which the policy group belongs. Multiple policy groups can belong to the same SVM.
You cannot assign a storage object to a policy group if its containing object or its child objects belong to the policy group.
It is a QoS best practice to apply a policy group to the same type of storage objects.

Steps

Create a policy group:

qos policy-group create -policy-group policy_group -vserver SVM -max-throughput number_of_iops|Mb/S|iops,Mb/S -is-shared true|false

For complete command syntax, see the man page. You can use the qos policy-group modify command to adjust throughput ceilings.

The following command creates the shared policy group pg-vs1 with a maximum throughput of 5,000 IOPS:
```
cluster1::> qos policy-group create -policy-group pg-vs1 -vserver vs1 -max-throughput 5000iops -is-shared true
```
The following command creates the non-shared policy group pg-vs3 with a maximum throughput of 100 IOPS and 400 Kb/S:
```
cluster1::> qos policy-group create -policy-group pg-vs3 -vserver vs3 -max-throughput 100iops,400KB/s -is-shared false
```
The following command creates the non-shared policy group pg-vs4 without a throughput limit:
```
cluster1::> qos policy-group create -policy-group pg-vs4 -vserver vs4 -is-shared false
```
Apply a policy group to an SVM, file, volume, or LUN:

storage_object create -vserver SVM -qos-policy-group policy_group

For complete command syntax, see the man pages. You can use the storage_object modify command to apply a different policy group to the storage object.

The following command applies policy group pg-vs1 to SVM vs1:
```
cluster1::> vserver create -vserver vs1 -qos-policy-group pg-vs1
```
The following commands apply policy group pg-app to the volumes app1 and app2:
```
cluster1::> volume create -vserver vs2 -volume app1 -aggregate aggr1 -qos-policy-group pg-app
```
```
cluster1::> volume create -vserver vs2 -volume app2 -aggregate aggr1 -qos-policy-group pg-app
```

Monitor policy group performance:

qos statistics performance show

For complete command syntax, see the man page.

Monitor performance from the cluster. Do not use a tool on the host to monitor performance.

The following command shows policy group performance:

cluster1::> qos statistics performance show
Policy Group           IOPS      Throughput   Latency
-------------------- -------- --------------- ----------
-total-                 12316       47.76MB/s  1264.00us
pg_vs1                   5008       19.56MB/s     2.45ms
_System-Best-Effort        62       13.36KB/s     4.13ms
_System-Background         30           0KB/s        0ms

Monitor workload performance:

qos statistics workload performance show

For complete command syntax, see the man page.

Monitor performance from the cluster. Do not use a tool on the host to monitor performance.

The following command shows workload performance:

cluster1::> qos statistics workload performance show
Workload          ID     IOPS      Throughput    Latency
--------------- ------ -------- ---------------- ----------
-total-              -    12320        47.84MB/s  1215.00us
app1-wid7967      7967     7219        28.20MB/s   319.00us
vs1-wid12279     12279     5026        19.63MB/s     2.52ms
_USERSPACE_APPS     14       55        10.92KB/s   236.00us
_Scan_Backgro..   5688       20            0KB/s        0ms

You can use the qos statistics workload latency show command to view detailed latency statistics for QoS workloads.

ONTAP 9 Manuals ( CA08871-402 )

Set a throughput ceiling with QoS

On this page